Acrathane Colorseal Instruction Sheet

High quality Decorative Protective Sealers

ACRATHANE COLORSEAL is designed for application to Multicoat KRETE KOTE, TOP COAT, KOOL KRETE, and other cementitous surfaces. It provides tough, durable and wear resistant protection to surfaces subject to heavy foot and moderate vehicular traffic.

ADVANTAGES

• Long Wearing
• Enhances Appearance
• Easy to clean - Minimal Maintenance
• Multiple color availability
• Clear Gloss and Clear Satin finishes available
• Weather and chemical resistant
• Waterbase - Environmentally safe to apply
• Excellent for Resealing and Coloring Old Kool Deck

FULL STRENGTH SECOND COAT APPLIED WITH ROLLER OR AIRLESS SPRAYER

SURFACE PREPARATION
All surfaces to which COLORSEALS are applied must be clean, free of grease, oil, dirt, dust, laitence, curing compounds, other foreign materials which may prevent bonding, and must be completely dry prior to COLORSEAL application.

Multicoat KRETE KOTE, TOP COAT, and KOOL KRETE must be allowed to set up and cure for at least 24 to 48 hours before COLORSEAL application. New concrete should be allowed to cure for a minimum of 20 days, and be free from curing compounds, release agents if any, and other water repellent materials which may prevent proper bonding.

APPLICATION
Multicoat COLORSEALS must be applied in two thin coats

First Coat - Mix COLORSEAL to uniformity with slow speed mixer. With continuous mixing, add clean water in ratio of 1 part to 3 parts COLORSEAL. Apply diluted COLORSEAL with nap roller with very firm pressure. (1/2" nap roller for smooth and 3/4" nap roller for rough surfaces.) Allow a minimum of one (1) hour to dry.
(Note: ACRATHANE Clear Sealers are applied in one or two coats full strength. DO NO DILUTE )

Second Coat - DO NOT DILUTE COLORSEAL! Mix to uniformity only. Apply with firm pressure. DO NOT APPLY THICKER THAN RECOMMENDED! Airless sprayer may be used for final coat.

COVERAGE
Two coats as described under APPLICATION will cover approximately 180-200 sq. ft. per gallon, depending on surface texture and/or porosity.

LIMITATIONS
Do not apply if surface temperature is less than 50°F, over 100°F, ambient temperature is less than 50°F and falling, over 100°F and rising, or if precipitation is expected within a 24hour period.

PACKAGING AND STORAGE
Furnished in one (1) and five (5) gallon containers.
Store at 40-90°F.
Shelf life - approximately 9 months in unopened containers.

WARRANTY
Materials are guaranteed with respect to uniformity and quality within manufacturers’ specifications. Seller makes no other warranty, expressed or implied, regarding the use of its products. Since use of the product is beyond the Seller’s control, the Buyer assumes all risks of use. Seller’s sole obligation shall be to replace material if found to be defective. Seller shall not be liale for any damages, injury, loss, direct or indirect or consequential, resulting from use of its products.

back to ACRATHANE COLORSEAL