CLEAR20 Clear Sealer
Multicoat’s CLEAR20 consists of a series of high quality waterbase modified resins that provide a high quality, durable seal on masonry, cementitious, and other building substrates. Not typically used in Colorseal applications, however it can be used to achieve a glossy, wet look. Is also used in conjunction with MULTI-STAIN to lock in the color. CLEAR20 can also be used on most masonry and stone substrates.
- Long Wearing
- Enhances Appearance
- Easy to Clean
- Weather Resistant
- Water Base – Green Friendly
150 – 200 square feet per gallon.
Substrate must be structurally sound and free from grease, oil, dirt, dust, sealers, water repellents and other foreign materials which may interfere with proper bonding. For areas vulnerable to negative side moisture, we always recommend treating the surface of the concrete/stone with VAPOR SHIELD to strengthen the surface’s resistance to vapor/efflorescence damage. Surface must be completely dry prior to CLEAR20 application. Multicoat KRETE KOTE and TOP COAT must be allowed to set up and cure for at least 24 to 48 hours before application. New concrete should be allowed to cure for a minimum of 20 days, and be free from curing compounds, release agents if any, and other water repellent materials which may prevent proper bonding. Do not use on treated lumber.
Mix to uniformity with slow speed mixer. DO NOT DILUTE CLEAR20, use as packaged. Apply with nap roller, brush, or a pump/airless sprayer.
- 1/2″ nap for application to smooth surfaces
- 3/4″ nap for application to rough surfaces
One coat application is recommended for a semi-gloss appearance. Two coats will have a shiny gloss appearance. CLEAR20 goes on white and dries clear.
**DO NOT APPLY COATS THICKER THAN THE RECOMMENDED AMOUNT/SQUARE FOOT. THIS WILL RESULT IN PEELING, PERMANENT WHITENING, AND PERFORMANCE FAILURE.