MULTI-STAIN
ACRYLIC STAIN
MULTI-STAIN is a translucent concrete stain. Ideal for our KRETE KOTE System, Overlay Stamp or Micro Topping systems. Can also be applied to bare concrete and stucco. Roll or spray one or two coats depending upon scope of work. Supplied in a ready-to-use pail. Water base material. Must have clear seal applied over the top to lock in color.
SUITABLE SUBSTRATE
Wood
Concrete
Metal
Foam
AVAILABLE COLORS
| COVERAGE |
| Per Gallon: 200ft 2 |
AVAILABLE SIZES
| 1 Gallon Cans | 5 Gallon Pails |
Click “Show More” to view instructions, or click the link below to download it to your computer.
INSTRUCTION SHEET >
SURFACE PREPARATION
- Surface to which MULTI-STAIN will be applied must be completely free from all grease, oil, paint, dirt, dust, laitance, sealers, curing compounds, water repellents and other foreign materials which may interfere with bonding.
- Surface must be completely dry prior to MULTI-STAIN application.
- Concrete surfaces should be etched with acid to open pores to achieve proper effect of stain.
- Acid must be neutralized with soda ash, baking soda, etc., before application.
- When using over Multicoat’s TOP COAT or KRETE KOTE, we recommend a light sanding prior to staining.
- Do not use acid to clean TOP COAT, KRETE KOTE, MICRO-TOPPING or STAMP MIX.
- Be sure surface is completely cured.
MIXING
- MULTI-STAIN must be thoroughly stirred and shaken prior to use.
- Do not add water: use at full strength.
- All pails of like color stain should be combined into one container prior to use during application for uniformity.
APPLICATION
METHODS
- Pump Sprayer (recommended)
- Airless Sprayer
- Roller
- Sponge
- Broom
INSTRUCTIONS
- Apply MULTI-STAIN in one coat.
- Apply stain generously to substrate to achieve desired color.
- Color will lighten slightly as it dries.
- Final color can be darkened by applying subsequent coats of stain: allow each coat to dry thoroughly.
- Then apply Multicoat’s CLEARSEAL to entire area stained.
Click “Show More” to view all of the Packaging & Storage information.
SIZES
- 1 Gallon Cans
- 5 Gallon Pails
STORE AT
- 60-85°F.
SHELF LIFE
- Approximately 18 months in unopened containers.
Click “Show More” to view Warranty Info, or click the link below to download it to your computer.
WARRANTY SHEET >
Multicoat Corporation offers a special 5-year Limited Materials Warranty to Trained and Certified Applicators. This Limited Warranty (effective upon date of purchase) protects the Applicator against delamination problems with all Multicoat systems, as well as water intrusion of Multicoat’s Waterproofing System, provided:
1. Multicoat system has been properly applied by a certified applicator.
2. Problem is determined to be due to defect of Multicoat Corporation’s products.
3. Applicator has prepared and filed the required Warranty Information Form(s) with Multicoat Products, Inc. covering the specific customer job(s).
NOTE:
Warranty is not applicable if there is movement or cracking of the underlying base and/or the weight bearing cement covering of the waterproofing membrane.
Failure to adhere to good construction and workmanship practices based on industry standard construction, means, methods, sequences and techniques could result in delamination, de-bonding and water intrusion for which Multicoat will not be responsible.
The end user must look to the Certified Applicator for satisfaction if any problem develops with the Multicoat system covered by the warranty. Multicoat suggests that the customer:
1. Use only a licensed contractor in good standing (fully bonded).
2. Make certain that the applicator has been certified by Multicoat, prior to work
commencing or certification while on the job. A simple phone call to Multicoat is sufficient to determine if an applicator is certified and if such certification is in
good standing.
In the event that it is determined that the Applicator failed to install the system(s) in accordance with Multicoat’s “instructions for use” or “specifications”, the warranty is void. See specific warranty information below.
WARRANTY
Materials are guaranteed with respect to uniformity and quality within
manufacturer’s specifications.
WARRANTY DISCLAIMER
There are no warranties which extend beyond the description of the fact hereof. Seller expressly disclaims all other warranties regarding the use of its products, whether expressed or implied, including the implied warranties of merchantability and for fitness of a particular purpose. Since use of the product is beyond the
Seller’s control, the Buyer assumes all risk of use.
EXCLUSIVE REMEDY
Seller’s sole obligation, and buyer’s exclusive remedy shall be to replace material if found to be defective.
DAMAGE LIMITATION
Seller shall not be liable for any damages, injury, loss, direct or consequential,
resulting from its products. The parties intend that the limitation of damages,
including consequential damages, applies even if the exclusive remedy provided for herein fails of its essential purpose.
Click “Show More” to view instructions, or click the link below to download it to your computer.
INSTRUCTION SHEET >
SURFACE PREPARATION
- Surface to which MULTI-STAIN will be applied must be completely free from all grease, oil, paint, dirt, dust, laitance, sealers, curing compounds, water repellents and other foreign materials which may interfere with bonding.
- Surface must be completely dry prior to MULTI-STAIN application.
- Concrete surfaces should be etched with acid to open pores to achieve proper effect of stain.
- Acid must be neutralized with soda ash, baking soda, etc., before application.
- When using over Multicoat’s TOP COAT or KRETE KOTE, we recommend a light sanding prior to staining.
- Do not use acid to clean TOP COAT, KRETE KOTE, MICRO-TOPPING or STAMP MIX.
- Be sure surface is completely cured.
MIXING
- MULTI-STAIN must be thoroughly stirred and shaken prior to use.
- Do not add water: use at full strength.
- All pails of like color stain should be combined into one container prior to use during application for uniformity.
APPLICATION
METHODS
- Pump Sprayer (recommended)
- Airless Sprayer
- Roller
- Sponge
- Broom
INSTRUCTIONS
- Apply MULTI-STAIN in one coat.
- Apply stain generously to substrate to achieve desired color.
- Color will lighten slightly as it dries.
- Final color can be darkened by applying subsequent coats of stain: allow each coat to dry thoroughly.
- Then apply Multicoat’s CLEARSEAL to entire area stained.
Click “Show More” to view all of the Packaging & Storage information.
SIZES
- 1 Gallon Cans
- 5 Gallon Pails
STORE AT
- 60-85°F.
SHELF LIFE
- Approximately 18 months in unopened containers.
Click “Show More” to view Warranty Info, or click the link below to download it to your computer.
WARRANTY SHEET >
Multicoat Corporation offers a special 5-year Limited Materials Warranty to Trained and Certified Applicators. This Limited Warranty (effective upon date of purchase) protects the Applicator against delamination problems with all Multicoat systems, as well as water intrusion of Multicoat’s Waterproofing System, provided:
1. Multicoat system has been properly applied by a certified applicator.
2. Problem is determined to be due to defect of Multicoat Corporation’s products.
3. Applicator has prepared and filed the required Warranty Information Form(s) with Multicoat Products, Inc. covering the specific customer job(s).
NOTE:
Warranty is not applicable if there is movement or cracking of the underlying base and/or the weight bearing cement covering of the waterproofing membrane.
Failure to adhere to good construction and workmanship practices based on industry standard construction, means, methods, sequences and techniques could result in delamination, de-bonding and water intrusion for which Multicoat will not be responsible.
The end user must look to the Certified Applicator for satisfaction if any problem develops with the Multicoat system covered by the warranty. Multicoat suggests that the customer:
1. Use only a licensed contractor in good standing (fully bonded).
2. Make certain that the applicator has been certified by Multicoat, prior to work
commencing or certification while on the job. A simple phone call to Multicoat is sufficient to determine if an applicator is certified and if such certification is in
good standing.
In the event that it is determined that the Applicator failed to install the system(s) in accordance with Multicoat’s “instructions for use” or “specifications”, the warranty is void. See specific warranty information below.
WARRANTY
Materials are guaranteed with respect to uniformity and quality within
manufacturer’s specifications.
WARRANTY DISCLAIMER
There are no warranties which extend beyond the description of the fact hereof. Seller expressly disclaims all other warranties regarding the use of its products, whether expressed or implied, including the implied warranties of merchantability and for fitness of a particular purpose. Since use of the product is beyond the
Seller’s control, the Buyer assumes all risk of use.
EXCLUSIVE REMEDY
Seller’s sole obligation, and buyer’s exclusive remedy shall be to replace material if found to be defective.
DAMAGE LIMITATION
Seller shall not be liable for any damages, injury, loss, direct or consequential,
resulting from its products. The parties intend that the limitation of damages,
including consequential damages, applies even if the exclusive remedy provided for herein fails of its essential purpose.
