SEAL BRITE (CA)
HIGH GLOSS CLEAR SEALER
SEAL BRITE is a VOC compliant, clear seal that works as a color enhancer on colored cementitious surfaces such as over our Multi-Stain System. Makes the sealed area take on a wet appearance. Compared to typical sealers, Seal Brite – CA provides increased protection against water intrusion and freeze/thaw cycles, chemical erosion, de-icing salts, and yellowing.
SUITABLE SUBSTRATE
Wood
Concrete
Metal
Foam
AVAILABLE COLORS
| COVERAGE |
| Per Gallon 250-300 sqft 2 |
AVAILABLE SIZES
| 1 Gallon Cans | 5 Gallon Pails |
Click “Show More” to view instructions, or click the link below to download it to your computer.
INSTRUCTION SHEET >
SURFACE PREPARATION
- Substrate must be structurally sound, free from grease, oil, paint, dirt, dust, sealers, laitenance, curing compounds, and any other foreign material which may prevent proper bonding.
- Surface must be dry and thoroughly cured prior to application of Seal Brite—CA.
- Do not use if substrate is subject to negative side water, vapor pressure or any type of negative side waterproofing application.
MIXING
- Seal Brite—CA is supplied in a ready-to-use condition, but it should be stirred prior to use to eliminate any phase separation or settling which may occur upon shipping and storage.
- Do not thin.
APPLICATION
METHODS
- Paint Brush
- Roller
- Airless Sprayer
INSTRUCTIONS
- Apply in a uniform manner by airless spray, brush, or roller.
- Maintain a wet edge to prevent lap marks.
- Apply in well ventilated area, away from sparks or open flames.
Click “Show More” to view all of the Packaging & Storage information.
SIZES
- 1 Gallon Cans
- 5 Gallon Buckets
STORE AT
- 50-90°F.
SHELF LIFE
- Approximately 24 months in unopened containers.
Click “Show More” to view Warranty Info, or click the link below to download it to your computer.
WARRANTY SHEET >
Multicoat Corporation offers a special 5-year Limited Materials Warranty to Trained and Certified Applicators. This Limited Warranty (effective upon date of purchase) protects the Applicator against delamination problems with all Multicoat systems, as well as water intrusion of Multicoat’s Waterproofing System, provided:
1. Multicoat system has been properly applied by a certified applicator.
2. Problem is determined to be due to defect of Multicoat Corporation’s products.
3. Applicator has prepared and filed the required Warranty Information Form(s) with Multicoat Products, Inc. covering the specific customer job(s).
NOTE:
Warranty is not applicable if there is movement or cracking of the underlying base and/or the weight bearing cement covering of the waterproofing membrane.
Failure to adhere to good construction and workmanship practices based on industry standard construction, means, methods, sequences and techniques could result in delamination, de-bonding and water intrusion for which Multicoat will not be responsible.
The end user must look to the Certified Applicator for satisfaction if any problem develops with the Multicoat system covered by the warranty. Multicoat suggests that the customer:
1. Use only a licensed contractor in good standing (fully bonded).
2. Make certain that the applicator has been certified by Multicoat, prior to work
commencing or certification while on the job. A simple phone call to Multicoat is sufficient to determine if an applicator is certified and if such certification is in
good standing.
In the event that it is determined that the Applicator failed to install the system(s) in accordance with Multicoat’s “instructions for use” or “specifications”, the warranty is void. See specific warranty information below.
WARRANTY
Materials are guaranteed with respect to uniformity and quality within
manufacturer’s specifications.
WARRANTY DISCLAIMER
There are no warranties which extend beyond the description of the fact hereof. Seller expressly disclaims all other warranties regarding the use of its products, whether expressed or implied, including the implied warranties of merchantability and for fitness of a particular purpose. Since use of the product is beyond the
Seller’s control, the Buyer assumes all risk of use.
EXCLUSIVE REMEDY
Seller’s sole obligation, and buyer’s exclusive remedy shall be to replace material if found to be defective.
DAMAGE LIMITATION
Seller shall not be liable for any damages, injury, loss, direct or consequential,
resulting from its products. The parties intend that the limitation of damages,
including consequential damages, applies even if the exclusive remedy provided for herein fails of its essential purpose.
- lorem
- lorem
- lorem
Click “Show More” to view instructions, or click the link below to download it to your computer.
INSTRUCTION SHEET >
SURFACE PREPARATION
- Substrate must be structurally sound, free from grease, oil, paint, dirt, dust, sealers, laitenance, curing compounds, and any other foreign material which may prevent proper bonding.
- Surface must be dry and thoroughly cured prior to application of Seal Brite—CA.
- Do not use if substrate is subject to negative side water, vapor pressure or any type of negative side waterproofing application.
MIXING
- Seal Brite—CA is supplied in a ready-to-use condition, but it should be stirred prior to use to eliminate any phase separation or settling which may occur upon shipping and storage.
- Do not thin.
APPLICATION
METHODS
- Paint Brush
- Roller
- Airless Sprayer
INSTRUCTIONS
- Apply in a uniform manner by airless spray, brush, or roller.
- Maintain a wet edge to prevent lap marks.
- Apply in well ventilated area, away from sparks or open flames.
Click “Show More” to view all of the Packaging & Storage information.
SIZES
- 1 Gallon Cans
- 5 Gallon Buckets
STORE AT
- 50-90°F.
SHELF LIFE
- Approximately 24 months in unopened containers.
Click “Show More” to view Warranty Info, or click the link below to download it to your computer.
WARRANTY SHEET >
Multicoat Corporation offers a special 5-year Limited Materials Warranty to Trained and Certified Applicators. This Limited Warranty (effective upon date of purchase) protects the Applicator against delamination problems with all Multicoat systems, as well as water intrusion of Multicoat’s Waterproofing System, provided:
1. Multicoat system has been properly applied by a certified applicator.
2. Problem is determined to be due to defect of Multicoat Corporation’s products.
3. Applicator has prepared and filed the required Warranty Information Form(s) with Multicoat Products, Inc. covering the specific customer job(s).
NOTE:
Warranty is not applicable if there is movement or cracking of the underlying base and/or the weight bearing cement covering of the waterproofing membrane.
Failure to adhere to good construction and workmanship practices based on industry standard construction, means, methods, sequences and techniques could result in delamination, de-bonding and water intrusion for which Multicoat will not be responsible.
The end user must look to the Certified Applicator for satisfaction if any problem develops with the Multicoat system covered by the warranty. Multicoat suggests that the customer:
1. Use only a licensed contractor in good standing (fully bonded).
2. Make certain that the applicator has been certified by Multicoat, prior to work
commencing or certification while on the job. A simple phone call to Multicoat is sufficient to determine if an applicator is certified and if such certification is in
good standing.
In the event that it is determined that the Applicator failed to install the system(s) in accordance with Multicoat’s “instructions for use” or “specifications”, the warranty is void. See specific warranty information below.
WARRANTY
Materials are guaranteed with respect to uniformity and quality within
manufacturer’s specifications.
WARRANTY DISCLAIMER
There are no warranties which extend beyond the description of the fact hereof. Seller expressly disclaims all other warranties regarding the use of its products, whether expressed or implied, including the implied warranties of merchantability and for fitness of a particular purpose. Since use of the product is beyond the
Seller’s control, the Buyer assumes all risk of use.
EXCLUSIVE REMEDY
Seller’s sole obligation, and buyer’s exclusive remedy shall be to replace material if found to be defective.
DAMAGE LIMITATION
Seller shall not be liable for any damages, injury, loss, direct or consequential,
resulting from its products. The parties intend that the limitation of damages,
including consequential damages, applies even if the exclusive remedy provided for herein fails of its essential purpose.
- lorem
- lorem
- lorem
