Allow Stamp Mix to partially dry. The time varies based on ambient temperature and humidity. A good test is to stamp a small area and check the bottom of the mat to see if material was “pulled up” during the stamping process. if this occurs, smooth the area that was affected, and wait a bit longer.
Prior to stamping, spray the bottom of the mat and the concrete surface with Stamp Release. On the mat, ensure the surface has a uniform coat. Then stamp, tap/step onto the mat to apply pressure, and then lift. Make sure to follow instructions on how to use the specific purchased mat. some require special layouts as you move across the surface.
Stamp Mats are used to impress patterns into Multicoat Stamp Mix to achieve natural stone patterns. There are numerous patterns available, and can be found in the “Instruction” section below.
