Premium Slatex System (Below Grade)

Application & Use:

Apply first coat of MULASTICOAT firmly with an airless sprayer, hopper gun or a 3/4” to 1 1/4” nap roller. Cover entire surface area, including footing, extending to a minimum of 6” above grade line. Allow to dry a minimum of one hour prior to second coat application. Apply second coat with airless sprayer, hopper gun or roller cover. Be sure all pin-holes, voids, etc. are completely covered. Allow to dry to touch. (MULASTICOAT will change to a dark blue color when dry.) Apply finish coat of MULTICOAT SCRATCH KOTE 2000 with 3/4 to 11/4” roller cover or hopper gun. SCRATCH KOTE 2000 furnished in 65 lb bags vigorously field mixed (to thoroughly disperse solids) with potable (clean) water in approximate amount of 2 to 2 1/2 gals per bag. Use MULTICOAT special mixing paddle, and margin trowel to clear vessel walls. Adjust consistency so applied material does not slump or stick to roller. One hour after application is completed, check to make sure that MULASTICOAT is completely covered (no blue should show). No protection board is required. LASTODRAIN OR EQUIVALANT DRAINAGE SYSTEM COULD BE INSTALLED BEFORE BACK FILLING.