Multicoat’s Insulated Concrete Form (ICF) STUCCO System is specifically designed to create a hard durable weather resistant, crack resistant, an impact resistant stucco finish to ICF Building block. This system provides an economically lightweight and attractive finish to all makes and style of ICF Block.
Mechanically mix with drill/paddle to disperse all lumps and thoroughly wet all particles. Use margin trowel to clear vessel sides. Foam Base can be sprayed or troweled onto wall area.: A woven 6 x 6 fiberglass mesh is used to add strength and impact resistance to the wall assembly coating. Overlap edges a minimum of 2”. While the Foam Base coat is still wet, embed and trowel the fiberglass mesh into coating and trowel out smooth. Allow to dry for 24 hours, longer in cooler weather.
A four (4) ounce bottle of color is supplied with each pail of stucco. After the color is mixed into the pail application can be performed by a variety of methods depending upon the desired finish and job site restrictions or limitations.
Contact us for more technical information.
