Ponds & Water Features (Above Grade)

Featuring “The Blue Stuff”, Multicoat’s Waterproofing system is ideal for ponds and water features. Mulasticoat® forms an elastic waterproof membrane while Pond Kote forms a hard durable protective coat. Fish Friendly!

Multicoat’s waterproofing system for fountains and ponds utilizes our MULASTICOAT®, SCRATCH KOTE 2000® and POND KOTE. MULASTICOAT® is a unique latex water-based coating that forms a seamless elastomeric waterproofing membrane. SCRATCH KOTE 2000® and POND KOTE are a resin modified cementitious coating which is used as a bonding material under the MULASTICOAT® and also acts as protective barrier over the MULASTICOAT®.

  • Low Cost
  • Minimum Down Time
  • Ease of Application
  • Superior Waterproofing
  • Excellent Bond Strength
  • High Tensile Strength/Elastomeric
  • Freeze / Thaw Resistant

more information >

More Information

Ponds & Water Features (Above Grade)


MULASTICOAT®: 80 to 100 sq. ft. per gallon per coat
SCRATCH KOTE: 2000 175 to 250 sqft per bag
POND KOTE: 175 – 250 sq. ft. per bag

Application & Use:

Roll, brush or spray SCRATCH KOTE 2000® to entire substrate to be waterproofed at a coverage rate not to exceed 175 sq. ft. per bag and allow to dry overnight. Gently hand stir MULASTICOAT® and apply two coats at a coverage rate of 80 to 100 sq. ft. per gallon. Allow to dry between coats. Broadcast 16-20 silica sand onto second coat of MULASTICOAT® while still wet and allow to dry. Apply a coat of SCRATCH KOTE 2000® or POND KOTE and allow to dry a minimum of 5 days before filling. Longer dry time will be required for interior applications. All 90° angles, corners or protrusions in substrate should be caulked with a suitable caulk. Those areas should also have Multicoat’s stitchbond polyester fabric embedded into wet Mulasticoat. Large cracks should be filled with Multicoat’s SPEED MIX 2000® prior to application of SCRATCH KOTE 2000 or POND KOTE. Optional Interior Finish: POND KOTE can be left as the final appearance. For a more color stable and uniform color appearance other finishes such as tile, plaster finishes, etc., can be used as the final visual covering. (Mist final coat of SCRATCH KOTE/POND KOTE with water once daily during the 5 day curing period for best results.)

Ponds & Water Features (Above Grade) Instructions 3 Part Specifications


  • Low Cost- Minimum Down Time
  • Ease of Application
  • Superior Waterproofing
  • Excellent Bond Strength
  • Freeze- Thaw Resistant
  • High Tensile Strength/Elastomeric Properties