Used for walkways, patios, driveways, and other high traffic areas, The Stampable Overlay System offers an extremely elevated look to your new or existing concrete surface. Natural stone veins and chamfered grout lines promote anti-skid, drainage, and variance in shade when applying Multi-Stain.
*OPTIONAL – Apply Vapor Shield to the substrate to reduce the green window of concrete, prevent efflorescence, and/or resist hydrostatic pressure coming through the substrate. Apply with a pump sprayer in conjunction with water, back to back. Repeat for a total of 2 coats. Allow 24 hours to dry prior to application of Scratch Kote
Apply Scratch Kote 2000 with a hopper gun, pressure sprayer or a ¾”-1¼” nap roller. Applied material should peak, not slump.
Use a gauge rake to pull the material across the Scratch Kote to achieve the desired thickness for the coming stamping process. once at the right firmness level, spray with stamp release and firmly press a stamp onto the surface to create texture.
With a sprayer, saturate the surface of the cured Stamp Mix with 1 or more colors of stain. Allow it to sit longer for deeper color, and broom around to achieve different saturation points.
Use a roller or sprayer to apply a coat of Clear20 to achieve a semi gloss finish
A: Yes, and in fact, some stamps require more. To find that information, look at the requirements for thickness when purchasing stamps.
A: Yes, layering colors while wet creates a natural shading effect. GO FOR IT!
A: Absolutely. Seal Brite is a great option for that if you’re trying to achieve better hot tire performance or just looking for a greater gloss.
A: No, all joints must be honored with any overlay system.
