System
Waterproofing
IT’S BETTER THAN WATERPROOF, IT’S “PRESSURE-PROOF”
Sunken fire pits, In-Pool islands, water features, and ponds can all benefit from The Shield Kote System. It’s proprietary polymer blend and activation technology, Shield Kote has proven relentless in strength and durability on areas that are subject to negative side pressure, thermal expansion and contraction and more. It can be left exposed for a smooth stucco-like finish or coated over with thin set or other coatings. Shield Kote was developed for Fish Hatchery Restoration and continues to be the chosen system for that market.
- Blocks Efflorescence
- Resists Negative Side Pressure
- Coatable
- Easy to Apply
- FIRE / SALT
- FREEZE / THAW
- UV
- IMPACT / ABBRASION
- *VAPOR SHIELD
- *POND KOTE
- Per Gallon: 75 – 150 ft 2
- Per Bag: 120 ft 2
Apply Vapor Shield with a pump sprayer in conjunction with water, back to back. Repeat for a total of 2 coats. Allow 24 hours to dry.
Using a trowel, hopper gun, or magic trowel, apply Pond Coat to the surface at the desired thickness as long as it is under 1/4″. In some cases, shrinkage cracks may appear, simply apply extra material to those areas upon completion.
POND KOTE
Density, g/cc
Compressive Strength (28 day)
Flexural Strength (28 day)
Water %
Toxicity (96 hr LC50)
For Safety Data Sheets, visit our “Resources” page
Q: Is this fish friendly?
A: Yes. Allow material to dry 7 to 10 days prior to filling with water. After filling, run circulation pumps/filters followed by a light brushing to remove any surface containments prior to adding fish. Longer dry time will be required for interior applications.
Q: Can I add colorant to the POND KOTE?
A: Yes as long as you mix the colorant with the water prior to adding the dry mix to it. You should not mix the colorant in after it has been mixed with water.
Q: Do I have to strip off any old material from the substrate?
A: Yes, we recommend approximately 92-100% removal of all old coatings prior to the application of this system.
Q: Can I paint the Pond Kote?
A: It is not advised to use paints in a submerged environment, especially in pools where chemicals are present. If you do decide to use paints, you should proceed with caution and contact the manufacturer to gather information prior to application.
System
Decorative Finish
THE PINNACLE OF DECKING PERFORMANCE
The MULTICOAT KRETE KOTE 2000 System is a super bonding, flexible synthetic resin modified cementitious coating which forms a cost effective, durable, anti-skid, weather and chemical resistant surface over properly prepared substrates. It can be applied to driveways, walkways, steps, pool decks and most concrete surfaces.
- Chemical Resistant
- Colder Than Concrete
- Anti-Skid
- Easy to Clean
- FIRE / SALT
- FREEZE / THAW
- UV
- IMPACT / ABBRASION
- VAPOR SHIELD
- KRETE KOTE*
- COLORSEAL
- Per Gallon: 75 – 150 ft 2
- Per Bag: 125 – 150 ft 2
- Per Gallon: 200-300 ft 2
*OPTIONAL – Apply Vapor Shield to the substrate to reduce the green window of concrete, prevent efflorescence, and/or resist hydrostatic pressure coming through the concrete substrate. Apply with a pump sprayer in conjunction with water, back to back. Repeat for a total of 2 coats. Allow 24 hours to dry prior to application of Krete Kote/Top Coat
Apply Krete Kote or Top Coat in 2 steps: a base coat, and a texture coat. Apply a smooth thin layer with a trowel, sprayer or magic trowel and allow to dry. Then apply a texture on top top desired aesthetic look.
Apply the diluted COLORSEAL with nap roller for the 1st coat with very firm pressure. (1/2” nap roller for smooth and 3/4” nap roller for rough surfaces). Allow a minimum of one (1) hour to dry. For the 2nd coat, apply at full strength. Airless sprayers may be used for the 2nd and final coat. Allow final coat a minimum of 24 hours before placing area into use. Will fully cure in 14 days, during which care should be exercised against excessive abuse.
Weatherometer
ASTM G23 2000 hrs – Passed
Compressive Strength
ASTM C109 45 Days air cured 2595 psi
Tensile Strength
ASTM-C190 457 psi
Bond Strength (Flatwise Tension
ASTM-C297 225 psi
Abrasion Test
ASTM-1242A 1000cyc-1000gms 39 mil loss
Salt Spray
ASTM-B117 300 hrs – Passed
Water Vapor Transmission
ASTM-E96A 8.5 Perms
50-Cycle Freeze thaw
ASTM-C67 Passed
Flexural Strength
ASTM-D790 Modulus of Rupture – 770psi
Impact Resistance
MIL-D-3134F Passed
Flame Spread
ASTM-E84 Class A
Q: Can I apply Krete Kote over my existing concrete deck?
A: Yes. Krete Kote is designed to go over old concrete or new concrete in order to not only elevate the look, but also to perform as an anti-slip, cooling surface that protects your concrete from the elements.
Q: Do I have to paint it?
A: There are many options for protecting Krete Kote. You may paint, stain, or simply clear seal it with a water-based or solvent sealer.
Q: Do I have to strip off any old material from the substrate?
A: It depends on the material. If it is an epoxy, silicone, or other non water-based materials you must strip all of it. if it is another acrylic coating, simply abrade the surface and prepare it to be bonded to.
Q: Can you patch Krete Kote in the future?
A: Yes. Simply follow the instructions as if you were doing the entire area but in a smaller area. An small artists touch is needed to match the texture and to feather the edges in, but it is not difficult, just a little detailed.
System
Decorative Finish
NATURAL TEXTURES, SUPERNATURAL LONGEVITY
Used for walkways, patios, driveways, and other high traffic areas, The Stampable Overlay System offers an extremely elevated look to your new or existing concrete surface. Natural stone veins and chamfered grout lines promote anti-skid, drainage, and variance in shade when applying Multi-Stain.
- Fiber Reinforced
- Flexible
- Super Bonding
- Easy to Apply
- FIRE / SALT
- FREEZE / THAW
- UV
- IMPACT / ABBRASION
- VAPOR SHIELD
- SCRATCH KOTE
- STAMP MIX
- MULTI-STAIN
- CLEAR20
- Per Gallon: 75 – 150 ft 2
- Per Bag: 175 ft 2
- Per Bag: 30 – 35 ft 2
- Per Gallon: 175 – 200 ft 2
- Per Gallon: 150-200 ft 2
*OPTIONAL – Apply Vapor Shield to the substrate to reduce the green window of concrete, prevent efflorescence, and/or resist hydrostatic pressure coming through the substrate. Apply with a pump sprayer in conjunction with water, back to back. Repeat for a total of 2 coats. Allow 24 hours to dry prior to application of Scratch Kote
Apply Scratch Kote 2000 with a hopper gun, pressure sprayer or a ¾”-1¼” nap roller. Applied material should peak, not slump.
Use a gauge rake to pull the material across the Scratch Kote to achieve the desired thickness for the coming stamping process. once at the right firmness level, spray with stamp release and firmly press a stamp onto the surface to create texture.
With a sprayer, saturate the surface of the cured Stamp Mix with 1 or more colors of stain. Allow it to sit longer for deeper color, and broom around to achieve different saturation points.
Use a roller or sprayer to apply a coat of Clear20 to achieve a semi gloss finish
Compressive Strength
Flexural Strength
ASTM C-494 (shrinkage)
Q: Can I build Stamp Mix up more than 1/4″?
A: Yes, and in fact, some stamps require more. To find that information, look at the requirements for thickness when purchasing stamps.
Q: Can I mix stain colors?
A: Yes, layering colors while wet creates a natural shading effect. GO FOR IT!
Q: Can I use a solvent sealer instead of Clear20?
A: Absolutely. Seal Brite is a great option for that if you’re trying to achieve better hot tire performance or just looking for a greater gloss.
Q: Can I bridge expansion joints?
A: No, all joints must be honored with any overlay system.
System
Decorative Finish
A MODERN FLOORING OVERLAY, FOR MODERN STYLES
Looking for a stained/polished concrete look for interior floors? Micro-Topping Overlay utilizes Multicoat’s cement and staining technology to create a low profile system that produces an elevated classic, yet modern approach to interior flooring.
- Anti-Microbial
- Flexible
- High Gloss
- Scratch Resistant
- FIRE / SALT
- FREEZE / THAW
- UV
- IMPACT / ABBRASION
- VAPOR SHIELD
- MICRO-TOPPING
- MULTI-STAIN
- CLEAR20
- Per Gallon: 75 – 150 ft 2
- Per Bag: 100 – 300 ft 2
- Per Gallon: 175 – 200 ft 2
- Per Gallon: 150-200 ft 2
*OPTIONAL – Apply Vapor Shield to the substrate to reduce the green window of concrete, prevent efflorescence, and/or resist hydrostatic pressure coming through the substrate. Apply with a pump sprayer in conjunction with water, back to back. Repeat for a total of 2 coats. Dry for 24 hours ***
Apply Micro-Topping with a Magic Trowel or standard trowel. The material should be “tight” and not floated to achieve thickness over the size of the sand in the mix.
With a sprayer, saturate the surface of the cured Stamp Mix with 1 or more colors of stain. Allow it to sit longer for deeper color, and broom around to achieve different saturation points.
Use a roller or sprayer to apply a coat of Clear20 to achieve a semi gloss finish
Weatherometer
ASTM G23 2000 hrs – Passed
Compressive Strength
ASTM C109 45 Days air cured – 2595 psi
Tensile Strength
ASTM C190 457 psi
Bond Strength (Flatwise Tension)
ASTM C297 225psi
Abrasion Test
ASTM 1242A 1000cyc-1000gms – 39 mil loss
Salt Spray
ASTM B117 300 hrs – Passed
Water Vapor Transmission
ASTM-E96A 8.5 Perms
50-Cycle Freeze thaw
ASTM-C67 Passed
Flexural Strength
ASTM-D790 Modulus of Rupture – 770psi
Impact Resistance
MIL-D-3134F Passed
Flame Spread
ASTM-E84 Class A
Q: Is Micro-Topping only for indoor use?
A: No, you can use this on decks as well. Note the smoothness of the material when installed may cause a surface to be slick outdoors.
System
Shower & Bathroom
Fluid Applied Waterproof Membrane for Tile Underlayment
Looking for a reliable and effective solution for waterproofing and crack isolation membrane for your tile and stone applications? This ready-to-use, liquid applied elastomeric membrane is perfect for surfaces such as wood, cement, and concrete, creating a super-bonding, seamless moisture/water barrier. Whether you’re working on a shower pan or slab-on-grade moisture barrier, GREEN BARRIER exceeds industry standards and provides excellent protection.
- Low Odor
- High Flexibility
- Green Friendly
- Easy to Apply
- FIRE / SALT
- FREEZE / THAW
- UV
- IMPACT / ABBRASION
- GREEN BARRIER*
- Multicoat Thin Sets
- Per Gallon: 35-45 ft 2
- **Per Bag: 45-100 ft 2
Apply a uniform coat using overlapping spray and roll strokes. The GREEN BARRIER will turn from its “Light Green” color to a “Dark Green” when the material has dried which typically takes 2 hours. Once dry, fill any pinholes and/or imperfections in the GREEN BARRIER with extra material and begin applying the second coat in a “Cross Hatch” pattern.
Coming Soon
System
Repair & Finish
KEEP IT TOGETHER UNDER PRESSURE
Utilizing Multicoat’s 2-Part Urethane “Speed Bond” The Concrete Crack Repair System is designed to be flexible yet firm. The hardness of Speed Bond makes it a great structural piece of a vulnerable area of your concrete allowing it to withstand pulling force and thermal expansion and contraction. Leave it exposed or give it a touch up with the integrated Krete Kote system or other decorative options. The choice is yours.
- Flexible
- Extremely Hard
- Super Bonding
- Coatable
- FIRE / SALT
- FREEZE / THAW
- UV
- IMPACT / ABBRASION
- VAPOR SHIELD
- SPEED BOND
- KRETE KOTE
- COLORSEAL
- Per Gallon: 75 – 150 ft 2
- Per Bag: 125 – 150 ft 2
- Per Bag: 125 – 150 ft 2
- Per Gallon: 200-300 ft 2
Apply Vapor Shield to the substrate to reduce the green window of concrete, prevent efflorescence, and/or resist hydrostatic pressure coming through the substrate. Apply with a pump sprayer in conjunction with water, back-to-back. Repeat for a total of 2 coats. Allow 24 hours to dry prior to application of Scratch Kote
Begin filling crack to a slightly over filled capacity, then immediately press SPEED BOND into crack and spread material level and flat onto adjacent sides of crack by using a margin trowel or putty knife. While SPEED BOND is wet, broadcast #16-20 silica sand generously over the wet SPEED BOND and allow to set until dry.
Apply Krete Kote or Top Coat in 2 steps: a base coat, and a texture coat. Apply a smooth thin layer with a trowel, sprayer or magic trowel and allow to dry. Then apply a texture on top top desired aesthetic look.
Apply the diluted COLORSEAL with nap roller for the 1st coat with very firm pressure. (1/2” nap roller for smooth and 3/4” nap roller for rough surfaces). Allow a minimum of one (1) hour to dry. For the 2nd coat, apply at full strength. Airless sprayers may be used for the 2nd and final coat. Allow final coat a minimum of 24 hours before placing area into use. Will fully cure in 14 days, during which care should be exercised against excessive abuse.
Viscosity Part A
Viscosity Part B
Work Life
Tack Free Time
Full Cure Time
Hardness
Temperature Range
Q: Can I leave the Speed Bond Exposed?
A: Yes, there is no need to coat over it if youre not looking to elevate the aesthetics of the concrete.
Q: What color is the Speed Bond?
A: It is a light concrete grey color.
Q: Can it bond to things other than concrete?
A: Yes, It bonds to pretty much everything. We have actually seen people use the Speed Bond for fixing broken 3d printed items.
Q: Can I apply Krete Kote over my existing concrete deck?
A: Yes. Krete Kote is designed to go over old concrete or new concrete in order to not only elevate the look, but also to perform as an anti-slip, cooling surface that protects your concrete from the elements.
Q: Do I have to paint it?
A: There are many options for protecting Krete Kote. You may paint, stain, or simply clear seal it with a water-based or solvent sealer.
Q: Do I have to strip off any old material from the substrate?
A: It depends on the material. If it is an epoxy, silicone, or other non water-based materials you must strip all of it. if it is another acrylic coating, simply abrade the surface and prepare it to be bonded to.
Q: Can you patch Krete Kote in the future?
A: Yes. Simply follow the instructions as if you were doing the entire area but in a smaller area. An small artists touch is needed to match the texture and to feather the edges in, but it is not difficult, just a little detailed.
System
Substrate Adhesion
NO, IT’S NOT JUST ANOTHER “THIN SET”
Our 3 grades of thin set Standard Set, Multi-Set, & Flex Set are formulated to do extraordinary things. Not only do they have incredible hold & non-sag properties, but they also have the endurance and durability to withstand drastic expansion and contraction with the smoothest of tiles (like glass) in the harshest environments (like a hot tub). Achieved by including the industry respected Scratch Kote 2000 bonding technology. Multicoat’s Multi Set and Flex Set thin set products are suitable for underwater applications, including pools and water features. These products are designed to adhere effectively in wet environments, ensuring durability and reliability in aquatic settings.
- Super Bonding
- Water resistant
- Flexible
- Durable
- FIRE / SALT
- FREEZE / THAW
- UV
- IMPACT / ABBRASION
- ALL THIN-SET GRADES
- <8: 1/4″ Sq. Notch
- 8″-12″: 1/2″ Sq. Notch
- >12″: 1/2″ Sq. Notch
-
- 90 – 100 ft 2
-
60 – 70 ft 2
- 45 – 50 ft 2
A high-end thin-set for stone, tile & brick at an economical price. perfect for floors and standard walls
MULTI SET “high end+” thin-set for smoother stone, tile, brick and rock over concrete and swimming pool surfaces. This thin set can also be used for underwater applications, making it ideal for swimming pools and other submerged installations.
FLEX SET is an “Elite” thin-set for any stone, tile, brick, or rock. Perfect for use over concrete, our product excels in swimming pool environments as it can even be utilized underwater.
Open Time – PSI
TIME | RESULT | ANSI A 118.14
20 min. | 170 | 75
Sheer Strength, PSI
Faux Brick to Concrete
TIME | RESULT | ANSI A 118.14
7 Day | 270
28 Day | 380
Quarry Tile
TIME | RESULT | ANSI A 118.14
28 Day | 305 | 150
Glazed Tile
TIME | RESULT | ANSI A 118.14
7 Day | 405 | 300
7 Day (wet) | 245 | 200
Mosiac Tile
TIME | RESULT | ANSI A 118.14
1 Day | 80 | 75
7 Day | 325 | 200
7 Day (wet) | 160 | 150
28 Day | 365 | 200
Faux Brick to Faux Brick
TIME | RESULT | ANSI A 118.14
7 Day | 265
28 Day | 435
ASTM C-482
TEST | RESULT | MODE OF FAILURE
Bond Strength | PSI 16 | Staple/Lathe & Cement
ASTM C-273
TEST | RESULT | MODE OF FAILURE
Shear Strength | PSI 54 | Bond Fail at brick tile to Grout
For Safety Data Sheets, visit our “Resources” page
System
Plywood Surface
AN ENHANCED PRODUCT FOR A CLASSIC TECHNIQUE
Multicoat’s Hard Coat Stucco System combines the strength of its polymer modified cementitious base coat, STUCCO BASE, troweled into metal lathe to form a tough underlayment. On top of the base, Multicoat’s Multi-Tex Stucco Mix which is a high build, flexible acrylic emulsion applied to form the finished appearance. The Hard Coat Stucco System is ideal for commercial or residential application where a tough exterior skin is required.
- Polymer Modified
- Long-Lasting
- Flexible
- Durable
- FIRE / SALT
- FREEZE / THAW
- UV
- IMPACT / ABBRASION
- STUCCO BASE
- MULTI-TEX STUCCO
- Per Bag: 60 – 80 ft 2
- *Per Bucket: 70 – 125 ft 2
Apply STUCCO BASE by trowel or spray, thick enough to cover the lathe, followed by a hard trowel technique to float the wall smooth. The outline of the lathe can be visible but should not be felt.
A four-ounce bottle of color is supplied with each pail of stucco. After the color is mixed into the pail application can be performed by a variety of methods depending upon the desired finish and job site restrictions or limitations. Stucco Mix can be sprayed, pumped or troweled.
Contact us for more technical information.
System
Foam Finish
THE RIGHT STUCCO FOR FOAM.
Multicoat’s Insulated Concrete Form (ICF) STUCCO System is specifically designed to create a hard durable weather resistant, crack resistant, an impact resistant stucco finish to ICF Building block. This system provides an economically lightweight and attractive finish to all makes and style of ICF Block.
- Impact Resistant
- Flexible
- Polymer Modified
- Great Textures
- FIRE / SALT
- FREEZE / THAW
- UV
- IMPACT / ABBRASION
- FOAM BASE
- MULTI-TEX STUCCO
- Per Bag: 80 – 120 ft 2
- *Per Bucket : 70 – 125 ft 2
Mechanically mix with drill/paddle to disperse all lumps and thoroughly wet all particles. Use margin trowel to clear vessel sides. Foam Base can be sprayed or troweled onto wall area.: A woven 6 x 6 fiberglass mesh is used to add strength and impact resistance to the wall assembly coating. Overlap edges a minimum of 2”. While the Foam Base coat is still wet, embed and trowel the fiberglass mesh into coating and trowel out smooth. Allow to dry for 24 hours, longer in cooler weather.
A four (4) ounce bottle of color is supplied with each pail of stucco. After the color is mixed into the pail application can be performed by a variety of methods depending upon the desired finish and job site restrictions or limitations.
Contact us for more technical information.
System
Fiber Cement Board Finish
INNOVATIVE SOLUTIONS FOR EVERY SYSTEM
The MULTICOAT MULTI-TEX STUCCO SYSTEM consists of a high build flexible acrylic emulsion applied to a non-combustible, lightweight, autoclaved, cementitious smooth fiber cement siding. It forms a cost-effective, durable weather-resistant exterior stucco finish.
- Easy to Apply
- Low Labor Cost
- Increased R-Value
- Polymer Modified
- FIRE / SALT
- FREEZE / THAW
- UV
- IMPACT / ABBRASION
- FLEX-C
- ELAST. JOINT TAPE
- MULTI-TEX STUCCO
- Per Tube: 20 -30 ln ft
- Per Roll: 50 ln ft
- *Per Bucket : 70 – 125 ft 2
Caulk joints using Fex-C. Once dry, use Elastomeric Joint Tape on all seams. Then apply Stucco Mix using a trowel or sprayer to achieve desired texture. For smooth, two coats are recommended to eliminate shadowing.
Contact us for more technical information.
